Oct . 29, 2026 00:34

100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier vs. Band-Segmented 100W and Broadband GaN SSPAs: Specification Comparison

YiYuan ComTech Co., Ltd.JOURNAL / SIDE BY SIDE

SIDE BY SIDE

100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier vs. Band-Segmented 100W and Broadband GaN SSPAs: Specification Comparison

YiYuan ComTech Co., Ltd. offers four GaN solid-state power amplifier (SSPA) modules, all operating from a 24–32 V wide-voltage DC supply. This article compares the 100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier — the band-segmented 50 W reference model — against its 100 W band-segmented counterpart and the two broadband 100–6200 MHz variants (50 W and 100 W). Key documented differences include operating frequency range (up to 1100 MHz versus up to 6000 MHz), instantaneous bandwidth (300 MHz for three of the four models; 150 MHz for the broadband 50 W), power gain tolerance (±2 dB for the band-segmented 50 W versus ±3 dB for the others), and current draw at rated output (2.8 A to 7.0 A depending on model). Efficiency, harmonic, spurious and VSWR specifications are identical across all four products per supplier documentation. Input power limits and input VSWR are not published and must be confirmed with the supplier before integration.

100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier vs. Band-Segmented 100W and Broadband GaN SSPAs: Specification Comparison
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier (band-segmented, 50 W)

02

100-400/400-700/700-1100 MHz 100 W High Gain Solid State High GaN Power Amplifier (band-segmented, 100 W)

03

100–6200 MHz 50 W High Gain Solid State High GaN Power Amplifier (broadband, 50 W)

04

100–6200 MHz 100 W High Gain Solid State High GaN Power Amplifier (broadband, 100 W)

Overview

YiYuan ComTech Co., Ltd. manufactures a family of high-gain, solid-state GaN power amplifier modules designed for sweep-source, LoRa, PA, and jammer system integration. This comparison focuses on the 100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier as the primary reference product and evaluates it alongside three closely related models from the same supplier:

  • Band-segmented 50 W (primary) – 100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier
  • Band-segmented 100 W – 100-400/400-700/700-1100 MHz 100 W High Gain Solid State High GaN Power Amplifier
  • Broadband 50 W – 100–6200 MHz 50 W High Gain Solid State High GaN Power Amplifier
  • Broadband 100 W – 100–6200 MHz 100 W High Gain Solid State High GaN Power Amplifier

All four products are GaN-based solid-state designs operating from a 24–32 V DC wide-voltage input.


Comparison Criteria

1. Operating Frequency Range and Instantaneous Bandwidth

ModelFrequency RangeOperating Bandwidth (typ.)
Band-segmented 50 W100–400 / 400–700 / 700–1100 MHz300 MHz
Band-segmented 100 W100–400 / 400–700 / 700–1100 MHz300 MHz
Broadband 50 W100–6000 MHz150 MHz
Broadband 100 W100–6000 MHz300 MHz

The band-segmented models cover a maximum upper edge of 1100 MHz across three sub-bands. The broadband models extend coverage to 6000 MHz, making them suitable for applications that require spectrum spanning VHF through mid-SHF. Note that the broadband 50 W model lists a typical instantaneous bandwidth of 150 MHz versus 300 MHz for the other three models; buyers requiring a wider instantaneous window at 50 W output should verify this figure with the supplier.

2. Peak Output Power

ModelPeak Output Power (CW, typ.)
Band-segmented 50 W50 W
Band-segmented 100 W100 W
Broadband 50 W50 W
Broadband 100 W100 W

Within each frequency family, the 100 W variant doubles the RF output power relative to the 50 W variant. The specifications are stated at CW signal conditions.

3. Power Gain and Gain Flatness

ModelPower Gain @ 0 dBm input (typ.)Gain Flatness
Band-segmented 50 W47 ± 2 dB±1 dB
Band-segmented 100 W50 ± 3 dB±1 dB
Broadband 50 W47 ± 3 dB±1 dB
Broadband 100 W50 ± 3 dB±1 dB

All four models achieve ±1 dB gain flatness across their respective operating bandwidths. The band-segmented 50 W model offers the tightest gain tolerance (±2 dB) of the group. The 100 W variants in both families share a 50 ± 3 dB typical gain figure, 3 dB higher than their 50 W counterparts.

4. Efficiency

ModelEfficiency (min / typ / max)
Band-segmented 50 W50% / 52% / 55%
Band-segmented 100 W50% / 52% / 55%
Broadband 50 W50% / 52% / 55%
Broadband 100 W50% / 52% / 55%

All four models share identical efficiency specifications: 50% minimum, 52% typical, and 55% maximum. This shared specification simplifies thermal and power-budget planning when a system integrates multiple modules from this family.

5. Harmonics and Spurious Performance

ModelHarmonics (1 to N) at rated output powerSpurious Level
Band-segmented 50 W12 / 13 / 15 dBc (min/typ/max)≥60 dBc
Band-segmented 100 W12 / 13 / 15 dBc≥60 dBc
Broadband 50 W12 / 13 / 15 dBc≥60 dBc
Broadband 100 W12 / 13 / 15 dBc≥60 dBc

Harmonic suppression and spurious levels are identical across all four models at their respective rated output powers (50 W or 100 W). The spurious level specification is listed as a minimum of 60 dBc.

6. Output VSWR

All four models specify a maximum output VSWR of 2:1.

7. Operating Voltage and Current Consumption

ModelSupply Voltage (min/typ/max)Current @ Rated Output Power (typ.)
Band-segmented 50 W24 / 28 / 32 V3.5 A
Band-segmented 100 W24 / 28 / 32 V6.0 A
Broadband 50 W24 / 28 / 32 V2.8 A
Broadband 100 W24 / 28 / 32 V7.0 A

All four models accept a wide-voltage 24–32 V DC input. The broadband 50 W model draws the lowest typical current at 2.8 A, while the broadband 100 W model draws the highest at 7.0 A. The band-segmented 50 W (100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier) draws 3.5 A, compared to 2.8 A for the broadband 50 W — a difference relevant in battery-powered or current-limited deployments.

8. DC Interface (Broadband 100 W Only)

The 100–6200 MHz 100 W model's documentation includes a detailed DC interface connector specification (Hybrid D-Sub 6-Pin, Male):

PinSignalDescription
1A1_28V+28 V DC power
2TEMPAnalog voltage proportional to module temperature (10 mV/°C)
3EnableEnable signal, 3.3–5 V
4ALCAutomatic Level Control
5CURRAnalog voltage proportional to IDD (100 mV/A)
6A2_GNDGround

This connector detail is not present in the documentation for the other three models. Buyers requiring telemetry (temperature monitoring, current monitoring, ALC) or remote enable functionality should confirm connector specifications with the supplier for the other variants.

9. Compatible Signal Sources and Application Context

  • Band-segmented 50 W (100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier): Sweep source and LORA source
  • Band-segmented 100 W: Sweep source and LoRa source
  • Broadband 50 W: PA and jammer applications
  • Broadband 100 W: PA and jammer applications

The two band-segmented models support sweep-source and LoRa input compatibility. The two broadband models are for PA and jammer system integration. This distinction may guide application-level selection independent of power or frequency considerations.


Summary Comparison Table

ParameterBand-seg 50 WBand-seg 100 WBroadband 50 WBroadband 100 W
Frequency range100–1100 MHz (3 sub-bands)100–1100 MHz (3 sub-bands)100–6000 MHz100–6000 MHz
Instantaneous BW (typ.)300 MHz300 MHz150 MHz300 MHz
Peak output power50 W100 W50 W100 W
Power gain (typ.)47 ± 2 dB50 ± 3 dB47 ± 3 dB50 ± 3 dB
Gain flatness±1 dB±1 dB±1 dB±1 dB
Efficiency (typ.)52%52%52%52%
Harmonics (typ.)13 dBc13 dBc13 dBc13 dBc
Spurious level (min)60 dBc60 dBc60 dBc60 dBc
Output VSWR (max)2:12:12:12:1
Supply voltage24–32 V24–32 V24–32 V24–32 V
Current draw (typ.)3.5 A6.0 A2.8 A7.0 A
DC interface detailD-Sub 6-pin (ALC, TEMP, CURR, Enable)
Typical applicationsSweep source, LoRaSweep source, LoRaPA, jammerPA, jammer

Procurement Considerations

The following observations are drawn directly from the available supplier documentation and describe documented differences between the models.

Frequency coverage: The band-segmented models, including the 100-400/400-700/700-1100Mhz 50w High Gain Solid State High Gan Power Amplifier, top out at 1100 MHz. Applications requiring coverage above 1100 MHz — for example, L-band through C-band system integration — must use a broadband model.

Output power class: The 100 W variants deliver double the RF output power of their 50 W counterparts within the same platform and voltage rail. The trade-off is higher current draw (6.0 A vs. 3.5 A for band-segmented; 7.0 A vs. 2.8 A for broadband).

Gain tolerance: The band-segmented 50 W model specifies the tightest gain tolerance (±2 dB) among the four. The remaining three models specify ±3 dB. Applications sensitive to gain variation across the band should note this difference.

Instantaneous bandwidth: The broadband 50 W model documents a 150 MHz typical instantaneous bandwidth, narrower than the 300 MHz listed for the other three. This should be confirmed with YiYuan ComTech Co., Ltd. before system integration.

Interface documentation: Only the broadband 100 W model includes a published DC connector pinout with ALC, temperature-monitoring and current-monitoring signals. Integrators requiring these telemetry functions for other variants should request datasheet confirmation from the supplier.

Input power limits: Maximum input power without damage (PIN, MAX) is not published for any of the four models in the available documentation. Buyers must request this value from YiYuan ComTech Co., Ltd. before integration to avoid damaging the module.


Specifications are reproduced from YiYuan ComTech Co., Ltd. product documentation. All values are subject to supplier confirmation. This article does not constitute a product datasheet or an endorsement.

THE COMPANY

YiYuan ComTech Co., Ltd.

Shenzhen Yiyuan is a leading technology company specializing in the research, development, and manufacturing of high-performance RF (radio frequency) solutions. With a strong focus on innovation and quality, we provide a comprehensive range of RF products, including RF power amplifiers, detectors, and jammers. Our advanced systems are designed to meet the demands of modern communication, security, and defense applications.…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish